i put a bd converter in my 06 cummins now im getting a code and the dealership says it is the clutches in the converter slipping anybody have any experiance on this or could give me some advice.

I went with the 1070217LX converter
Code is P1740 TCC Or OD Solenoid Performance

thanks in advance
Ashley

the converter is 1 year old today



---AutoMerged DoublePost---

bump no info

 

Ashley you might try calling BD instead of going back and forth here. Might get your answers faster.

Dave Dias
800-887-5030 ext 105

 

yea i have his info

 

Hey Ashley, where did you get to discussing this with our techs this morning?
bump no info

 

he thinks its the trans have to go out and se when it slips so i did and it slips in 3rd and 4th with the light comming on

 

That would make more sense than the T/C slipping, keep me posted...

 

can burn it down in 2-4th gear now starting to get smoke from under the truck

 

Where are your located, are you able to get me your zip so I can see if we have a transmission delaer in the area. Have you talked to our shop today?

 

he is out here in Gloucester, VA 23061

Lives about 4 miles from me.

 

talked to the dodge trans gooroo yesterday and all the tests he did he is leaning to the t/c to be trashed can make 84% t/c slippage he said and all the heat has burnt the front pump seal up going back in 3 weeks to have trans replaced now need a new t/c