Winter front for Dodge Ram
Thread Starter
|
Diesel Fan
Joined: Sep 2008
Posts: 22
Likes: 7
From: Salt Lake City, UT
Winter front for Dodge Ram
Tough 1/8" ABS plastic that bolt on to your grille to reduce the cold air flow under hood in winter.. Does not restrict intercooler function. helps engine warm up faster. No drill. Price range from $35 to $50 depending on model. call me at 801-599-7877 for price. or email me at ericbu12@yahoo.com
Thread Starter
|
Diesel Fan
Joined: Sep 2008
Posts: 22
Likes: 7
From: Salt Lake City, UT
T-Bone,
I did and I have a few sets left.. The problem is that it is hard to mount. and the radiator is too close to the panels.. I use J-hooks to mount and it is sorta hard to mount....I made it years ago by a guy that sent me a pattern. If it is really cold like below 30 deg then it would be beneficial.. would not recommend it for near 60.. would have to remove a couple for more air.. If you want a set, I'll sell it to you for $20. Email me at ericbu12@yahoo.com
---AutoMerged DoublePost---
Cody, Thanks.. you can call me at 801-599-7877
I did and I have a few sets left.. The problem is that it is hard to mount. and the radiator is too close to the panels.. I use J-hooks to mount and it is sorta hard to mount....I made it years ago by a guy that sent me a pattern. If it is really cold like below 30 deg then it would be beneficial.. would not recommend it for near 60.. would have to remove a couple for more air.. If you want a set, I'll sell it to you for $20. Email me at ericbu12@yahoo.com
---AutoMerged DoublePost---
Cody, Thanks.. you can call me at 801-599-7877
Last edited by EricBu12; Oct 29, 2011 at 02:34 PM. Reason: Automerged Doublepost
Diesel Enthusiast
Joined: Mar 2007
Posts: 150
Likes: 8
From: Idaho Falls, Idaho 8
I can attest to the quality and ease of use of Eric's winter fronts. I have been using his fronts for three years and think they are the best. I highly recommend the winter fronts that Eric makes.
Diesel Bomber
Joined: Aug 2009
Posts: 2,257
Likes: 186
From: CO
1st Gen Solution is Easy
I made a set like that myself I used for a year on my 1st Gen and like Eric said they are a PITA. Hard to install and you have to remove one or more any time the temp goes up to keep from overheating. Best 1st Gen solution is just put a piece of cardboard between the I/C and radiator if/when you need it on the coldest days. Easy in/out and lets the I/C have cold air all the time.
Thread Starter
|
Diesel Fan
Joined: Sep 2008
Posts: 22
Likes: 7
From: Salt Lake City, UT
Cummins-Dodge,
Your set is $45 total shipped. I take check or money order. Make note on payment your model truck.
Send to Eric Buckel
6139 south 4480 west
Salt Lake City, UT
84118
---AutoMerged DoublePost---
rgtrdt38
Thanks for the Positive feedback and Review.!
Your set is $45 total shipped. I take check or money order. Make note on payment your model truck.
Send to Eric Buckel
6139 south 4480 west
Salt Lake City, UT
84118
---AutoMerged DoublePost---
rgtrdt38
Thanks for the Positive feedback and Review.!
Last edited by EricBu12; Oct 30, 2011 at 09:07 PM. Reason: Automerged Doublepost
