pm sent also

 

PMs replied too

 

Current Stock:
1 Set 1/2" longer for 2" level
3 Sets 3/4" longer for 2.5" level
2 Sets 1" longer for 3" level

All are $300 + shipping

 

I have a 2nd gen which used to be a gasser, I converted it to diesel last year. I put springs out of a diesel in it. I also put a 2 1/2" level kit in. Would these units fit under my 2500? and if so could I get the 3/4 extended ones with no paint and the bushings out? I would press these in myself.

 

PM Sent.

 

ive got the 2.5inch leveling kit on my 02 cummins. when can u get a set for me? powder coated?
maybe a deal for a poor army soldier in korea??

 

Any idea of shop prices to change these out, or time frame for the DIYer?

 

Eh, shop prices will vary depending on the shop. At my local shop, I believe it took us about an hour and a half or so.

DIY - Make sure you can get the front end lifted off the ground pretty good. Depending on tools and skill level, two hours and up.

 

Currently Available:

1 set of 1/2" longer
2 sets of 3/4" longer
1 set of 1" longer

All sets are currently bare metal.
$280 for bare, with bushings not pressed in.
$300 for painted, with bushings pressed in.
Add $50 for powder coating.

All prices do not include shipping.

Here's a picture of powder coated arms I did for redneckcummins85:

 

man these look great!!! still waiting to get them installed..should have them on next week...will get you pics as soon as they are on my rig!! Again, Great job Bud!