Anybody have subs in their reg cab 2nd gen? pics?

 

go to http://www.subthump.com/dodgeram.htm
they have a box for 2 10's or 2 12's behind the seat with a spot to mount the amp only $109 for the cheaper box and 129 for nicer one

 

Somebody also makes a replacement for the lower section of the middle seat that'll hold a 12" sub. It's the same company that makes the box for under the rear seat of a quad cab. I think it's MTX. There's a post in the how-to section on Ramchargercentral.com about it.

 

I would be really interested to see that box. Ill look at mtx real quick but does anybody have a link to the box?

---AutoMerged DoublePost---

I found one made by JL for the 3rd gens but nothing for the 2nds besides the box that goes under the rear seat.

 

i have 2 10" alpine r10's in mine with cheap box from wal-mart and they fit behind the seats and you can move the seat all the back still. on the floor between the sub i have a rockford amp at 2000 watts. which soubd good only with the windows down there is not enough air space in the cab with the windows up

 

Ive got one Kicker CVR 10" behind the pass. seat in my 96 reg cab. Getting ready to trade it out on a CVR 12" to get a little more bottom end. Ill try to get some pics up next weekend when I get back to my truck.

 

JL Audio makes the box that replaces the center seat bottom comes with a 12w3 sub installed. I have one in my truck and it hits pretty hard and you cannot tell it is even there. Here is a link JL Audio: Products

 

DOes anyone know about a sub box for a 07.5 LMM reg cab

 

you can also measure it out and get some 1/2" or 3/8" osb board and make your own, i made 3 12" boxes for around 30 bucks