I have a 95 auto cummins with the 160hp pump and Im looking at swapping the 131 delivery valves with 181s out of a 215 pump, anyone done this or have any tips for me before i get into it?

---AutoMerged DoublePost---

im already running a 0 plate, 3k gov. springs, 90hp injectors, and the turbo is a hx40 compressor with 12cm exhaust housing. I also have the 2095 rack plug and the timing adjusted. just incase anyone is wondering

 

welcome to diesel bombers and check this out and see if it will help https://www.dieselbombers.com/5-9l-1...ry-valves.html

 

thanks for the link. im still kinda wondering if i would take the holders, copper washers, and the valve out of the 215 or just the delivery valve? that post is more about using new stuff