Hey there guys got another question for the masses. I've been thinking about upgradin my compressor wheels when I do my suncoast transmission sometime in the next few months. Im also considering stage 1 nozzles and an airdog then never touching my 6.4 again performance wise. Haha, just wondering if anyone has tried Elites stuff out and what they think. I will of course go with RCD once the kits are available through Josh. Any feedback would be appreciated. Lets get this 6.4 forum section jumping guys!

Jared @ RFFI

 

actually there is a truck here in town (an old man LOL) 2010 6.4 extended cab long bed. had 300 miles (thats not a typo!!) on it before .
Elites 71mm low pressure turbo
66mm high pressure turbo.
bov.
elites full egr delete with electronic wastegate.
full exhaust.
elites ported and polished heads with bigger valves. elites stgII valve train
elites chromoly pushrods
elites full fuel system
elites ported fuel rails
elites modded high pressure fuel pump
elites 60hp nozzles
stg3 snow water meth kit

dynoed 683hp on erics (ID)extreme race tune
o that was on a stock trans with a 6" lift and 20"s on 37"s

now he's going with a larger hpfp and bigger injectors ... wants 700 on fuel

 

so a tune only 6.4 will make nearly 600HP.... are you telling me he spent probably close to or over 10 grand in upgrades and gained 100HP?????

 

yes at elevation he made 683 .... sadly yes.. but thats about what every one is putting out with all those parts... he has plenty of fuel left at wot.. . . he actually is stepping into 700hp fuel only as of now... bigger hpfp and injectors. ..
but 683hp doesnt seem like much.. holy chit ... that f-n truck sreams.. makes my reg cab look like a stock hemi vs. a tuned 7.3 power stroke!!!

def. makes you relize how over priced parts are getting to be imho.. but until cheaper ones come out im still gonna buy them LOL

 

haha makes me glad I have a 12valve right now..... but I'll prob get a 6.4 after I graduate so I'll be doin the same thing too. or maybe an LBZ/LMM Max. ah I got another two years to think about it.

 

Cabs off my truck as of yesterday.

RCD Turbos
RCD Rails
RCD HPFP
RCD Injectors
RCD Custom Ported Race Heads
RCD Springs
ARP Studs
RCD Custom WG Kit.
Ill let you all know the turnout next week

Jared @ RFFI

 

Awesome dude good luck to ya.

 

You suck Jared

 

yeah what he said , let know how everything goes

 

I LIED, PUT MY CAM IN TODAY. NOW IM EXCITED!!!! Didnt know I was getting one till i walked in the shop and Josh showed me the cam, way to wake up in the morning huh? Im psychd

Ill keep you guys posted!

Jared @ RFFI