5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

help ?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-23-2010 | 04:11 PM
mylilpwny's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Oct 2009
Posts: 200
Likes: 5
From: south oc cali
Default help ?

any one have an intake horn lying around either stock or aftermarket that they would be willing to sell ?

and also any one know were to buy an EGR delete kit for our truck
 
  #2  
Old 01-23-2010 | 06:24 PM
mishkaya's Avatar
Diesel Bomber
Joined: Oct 2008
Posts: 2,618
Likes: 108
From: Iowa
Default

Originally Posted by mylilpwny
any one have an intake horn lying around either stock or aftermarket that they would be willing to sell ?

and also any one know were to buy an EGR delete kit for our truck
Probably should post a wanted thread in the for sale section for your intake horn.
Wanted To Buy (WTB) - Used - Diesel Bombers
Don't know what's involved in the EGR system on a truck that old (I see it's a cali truck), but I can't imagine it would be very extensive. I thought they only had a catalytic converter for that year...
 
  #3  
Old 01-24-2010 | 11:32 AM
BTI's Avatar
BTI
Diesel Fan
Joined: Aug 2008
Posts: 55
Likes: 1
Default

Theres usually some in the for sale section sooner or later.
There is almost ALWAYS one on ebay.

KO
 
  #4  
Old 01-25-2010 | 11:35 AM
PhilipR's Avatar
Diesel Wrench
Joined: Nov 2009
Posts: 629
Likes: 44
Default

I have my stock one laying in the garage off my '98..... $40 shipped?
 
  #5  
Old 01-25-2010 | 02:17 PM
mylilpwny's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Oct 2009
Posts: 200
Likes: 5
From: south oc cali
Default

cool thanx for the replies ... let me see if i can get mine fixed duster and if not i will pm you
 
  #6  
Old 01-25-2010 | 02:18 PM
PhilipR's Avatar
Diesel Wrench
Joined: Nov 2009
Posts: 629
Likes: 44
Default

Let me know...it's just sitting there collecting dust.
 
  #7  
Old 02-02-2010 | 11:21 PM
12valve801's Avatar
Diesel Enthusiast
Joined: Jul 2009
Posts: 107
Likes: 3
From: West Valley Utah
Default

on the egr delete i just had a flange made by a guy i know that has a waterjet but i bet fabbing one up by hand wouldn't be so hard.just sealed it where it met the stock intake horn cause i couldn't get it off my exhaust mani. then just plugged the vacuum lines
 
  #8  
Old 02-04-2010 | 10:51 AM
Hammer's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 714
Likes: 87
From: York,PA
Default

I have a complete intake from the head to the horn here if he needs it.(intake plate,grid heater,intake horn,grid heater wiring and all needed bolts)

Its off of my 98 truck and I will not use it again as I have had the Twin Ram on for the last 3 years and will not go back to the stock horn setup........Andy
 




All times are GMT -5. The time now is 07:37 PM.