Diesel In Distress - Support Ticket Need Help ? Broke Down Or in Urgent Need Of Assistance Post Here , Thread Will Be Priority and You have the ability to close your own thread when its fixed . If You Do Not Reply in 10 Days your thread will be closed as we will assume its fixed , You can Reopen YOUR Discussion Topic if you wish .

Ford 6.0L crank, but no start

Thread Tools
 
Search this Thread
 
Old Nov 3, 2015 | 11:55 PM
  #1  
brianj2077's Avatar
Thread Starter
|
Newbie
Joined: Aug 2015
Posts: 6
Likes: 0
From: New Hampshire
Default Ford 6.0L crank, but no start

Hey guys,
I was driving on the highway when I noticed a bad vibration, which lead to a loss of engine power and eventually the engine completely shut off in the middle of the highway. I pulled it off into the break down lane, let it sit for a few minutes and tried to start it again. Nothing. The starter kept cranking but the engine wouldnt turn over.

I'm thinking its a failed FICM or ICP but any other suggestions or recommendations would be appreciated!
 
Old Nov 4, 2015 | 10:49 AM
  #2  
carlos valente's Avatar
Joined: Nov 2013
Posts: 3
Likes: 0
Default

2006 ford E-450 super duty V8 6.0
got engine oil pressure at the turbo inlet line , replaced new high pressure pump and there is no oil at all in the high pressure pump
 

Last edited by carlos valente; Nov 4, 2015 at 10:56 AM.




All times are GMT -5. The time now is 11:18 PM.