Thanks for bringing this back up Scott. Apparently I forgot to post my pics here.
Am having trouble getting them to load as attachments, so had to use a URL link. They are small, but you can go to this link if you want to view a larger image: http://www.thesuperiorsynthetic.com/Picture_Page.php Sorry.

 

So, can this take the place of the stock oil filter ?? (some guys with twins have to take the battery out to change oil ).

Heath, can you PM me a price?

Thanks.

 

The BMK-11 kit still utilizes the factory filter location for the full flow filter. The BMK-15ea kit (which is what I have) is a dual remote mount kit that relocates both the full flow and bypass filters.

-Chuck

 

With twins I would get the BMK-15. That way you can relocate them to the frame where they will be WAY easier to change.

 

Here is a page on amsoil's webstie where people can submit installation photos. Might look thru there and see if any look doable??
http://www.amsoil.com/bypassfilters/index.aspx

 

Heath, your install looks good! I like where you put the angle iron bracket.. smart move. I may have to do it that way myself.
Scott

 

I like it there, just point it down instead of up. It's hard to see, but I also took small, thinner angle iron and ran it down the sides of the battery and then took another angle iron with holes(shelf bracket), cut it at the bend and set it across the middle of the battery. It sits on the to irons running perpendicular. This was done just to support the edge of the battery. The old batter bracket came off and I rand the two long bolts down thru the "shelf bracket" and the mount support. This is what holds it all together.
NOt sure if that made sense or not.
It was more of a project that I wanted but it worked out.

 

Makes sense bro. Thanks for the tips!
Scott

 

Good stuff guys - thanks for the info....