Baldwin Fuel Filters
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2007
Posts: 103
Likes: 4
I also use a Baldwin PF7977 filter rated at 2 - 5 micron, in the drop in stock location filter.
The filter on the rail, (in picture) is a Baldwin BF1212 with water separator rated at 2-4 micron.
The small canister type pre filter is a Baldwin BF1173, Diesel 3/8" Inline Strainer, (not a filter), but thanks for the advise.
Only one day and I've received a few e-mail asking for parts numbers and what, I'd do a short write up with pictures if I don't offend anyone, being the new guy here.
The filter on the rail, (in picture) is a Baldwin BF1212 with water separator rated at 2-4 micron.
The small canister type pre filter is a Baldwin BF1173, Diesel 3/8" Inline Strainer, (not a filter), but thanks for the advise.
Only one day and I've received a few e-mail asking for parts numbers and what, I'd do a short write up with pictures if I don't offend anyone, being the new guy here.
Last edited by AlCorr; Apr 8, 2008 at 05:29 AM.
Diesel Fan
Joined: Apr 2008
Posts: 12
Likes: 4
From: North Alabama
My pre-pump fuel filter paper on my '06 PSD:
http://www.rocketcityrockcrawlers.co...2008-02-25.pdf
Good luck.
Al
http://www.rocketcityrockcrawlers.co...2008-02-25.pdf
Good luck.
Al
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2007
Posts: 103
Likes: 4
BD aux lift pump - Dodge Diesel - Diesel Truck Resource Forums
---AutoMerged DoublePost---
My fuel pressure is holding strong with this set-up.
---AutoMerged DoublePost---
My fuel pressure is holding strong with this set-up.
Last edited by AlCorr; Apr 10, 2008 at 05:04 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
Jun 5, 2015 03:28 PM
