DDP nozzle question
#1
DDP nozzle question
ey powerstroke guys I have a buddy with an 02 7.3. He has a T.S six position chip stacked with an ejwa, a fass 150 and a bd built tranny. We were looking at the ddp sticks as his next upgrade and just wandering if anyone on here is running them and could give me some info i could pass on to my buddy. And ill be helping him install them so is there anything you need or are thay as easy to swap out as a cummins.
#5
Installing Nozzles on a set of stock AD injectors is not cost effective. The nozzle does not control the amount of fuel that the injector can inject. A stock AD injector can inject 140cc per 1000 shots. Throwing a set of larger nozzles on a AD injector does not change the 140/1000. It can change the time it takes to empty which can add HP, but its a waste of money.
To change the nozzles on a PSD injector you have to completly disassemble the injector. Its not a simple nozzle swap like on a Cummins.
I would suggest a set of stage 2's for around 400RWHP or Hybrids for above that.
I am Extreamly happy with the AC code injectors we just put in Chelseas Excursion.
To change the nozzles on a PSD injector you have to completly disassemble the injector. Its not a simple nozzle swap like on a Cummins.
I would suggest a set of stage 2's for around 400RWHP or Hybrids for above that.
I am Extreamly happy with the AC code injectors we just put in Chelseas Excursion.
The following users liked this post:
Brandon J (06-16-2011)
#6
#8