24V Valve Lash Limits
#1
24V Valve Lash Limits
Minimum
Intake
0.152 mm (0.006 inch)
Exhaust
0.381 mm (0.015 inch)
Standard
Intake
0.254 mm (0.010 inch)
Exhaust
0.508 mm (0.020 inch)
Maximum
Intake
0.381 mm (0.015 inch)
Exhaust
0.762 mm (0.030 inch)
Adjustments should only be performed when the engine coolant temperature is less than 60 °C (140 °F).
Intake
0.152 mm (0.006 inch)
Exhaust
0.381 mm (0.015 inch)
Standard
Intake
0.254 mm (0.010 inch)
Exhaust
0.508 mm (0.020 inch)
Maximum
Intake
0.381 mm (0.015 inch)
Exhaust
0.762 mm (0.030 inch)
Adjustments should only be performed when the engine coolant temperature is less than 60 °C (140 °F).
The following users liked this post:
garibaldi929 (12-02-2010)
The following users liked this post:
DB Admin (11-24-2007)
#3
I run either 8 intake 18 exhaust for stock trucks.
and 10 intake 20 exhaust for modified.
Unless they have a custom cam. Then things can change.
~Wes~
and 10 intake 20 exhaust for modified.
Unless they have a custom cam. Then things can change.
~Wes~
#4
Here is a simple write up on how to adjust you valve lash...
http://mopar.mopar1973man.com/2002%2...adjustment.htm
http://mopar.mopar1973man.com/2002%2...adjustment.htm
The following users liked this post:
Wyatt Earp (12-23-2007)
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM