DIY injectors
#1
#2
#3
#4
#6
DPP is a dealer for Rosewood If I remember correctly... The DIY is no longer.
For 2's, you're going to want a built tranny or aftermarket clutch if you do that 5speed swap, intercooler, E-fuel, and an HPOP...Probably a turbo as well. It wouldn't hurt you to do studs for insurance but they won't necessarily be needed. Springs and pushrods wouldn't hurt either.
Check out Rosewood for injectors... He has budget builds depending on the condition of your current injectors.
For 2's, you're going to want a built tranny or aftermarket clutch if you do that 5speed swap, intercooler, E-fuel, and an HPOP...Probably a turbo as well. It wouldn't hurt you to do studs for insurance but they won't necessarily be needed. Springs and pushrods wouldn't hurt either.
Check out Rosewood for injectors... He has budget builds depending on the condition of your current injectors.
#8
You could probably get away with injectors, HPOP and chip... You will need to address the transmission though... The E-fuel and intercooler would be nice but aren't a necessity as well... If you tow you will want the intercooler and if you're fuel pressure is dropping too much you will want E-fuel.
#9
Thread
Thread Starter
Forum
Replies
Last Post
klein444
Chevy/GMC 6.2L and 6.5L
6
03-08-2015 11:42 AM