I've got a 97 F-250 and a 95 F-350, and gonna put the front axle out of the 350 on the other truck. What all am i looking at doing to get it under the 250? Is it mostly just bolt up or am i looking at a more complicated project?

 

its all bolt in you lucky SOB .

 

I also did new springs when I did mine, and needed longer brake lines, and a drop bracket for the track bar. I also had to use the steering pitman arm from an F-350.

 

Use the F350 springs, steering, tracbar, tracbar bracket and axle everything bolts right up takes about 2hrs to do

 

i wish i had that axle i've been wanting to do that to my f250 power stroke for years