DPF FOOLERS
#1
DPF FOOLERS
I put a DPF delete pipe on my truck but it didnt come with any foolers. Sooo my friend looked it up for me and said we can use resistors and it works the same. Is this true and if so what resistors? And if it dont work where can i buy just the foolers?
Thanks for any and all help
Thanks for any and all help
#2
The following users liked this post:
1985johndeere (02-13-2009)
#6
The following users liked this post:
1985johndeere (02-13-2009)
#7
#8
I helped him with the DPF delete, and was wondering, someone said that the resistors dont work... But my question is we put reistors in the back 2 senors and the one closest to the turbo is still installed.. IF the reistors didnt work, wouldnt he get a code for 2 senors? my thinking is, we put 680ohm resistors in the 2 plugs we took out.. i had done a lot of reading before we did this and had alot of guys putting 1k in the front and then 680 in the back.. but then i also read that someone took apart the H&S foolers and said they were just 320ohm resistors wrapped in some plastic.... So what i am thinking.. we should go to radioshack and get some 320ohm resistors and stick in there.. I was messing with his truck last night, checked the codes and it was only throwing the egr code for being unplugged and the DPF pressure code for the pressure box being unplugged... so we started it up and let it run for probably 15min and no other codes showed up... We did the key cycle trick, and no codes popped up so... Someone please chime in if i am wrong or not... Go get some 320ohm resistors and stick in them??
#10