2015 pure stock
#1
2015 pure stock
i just bought a used 2015 cummins and it 100% stock ... so i looking to start do some mods with it .. the 3dn generation is brand new vertion for me so i have no idea what i going to do now . the starter budget is 3k please any sugestion ? Exhaust and intake + elbow + fuel pump ? or exhaust , intake and a tuner ? I like turbo back exhaust but what i going to do with PDF sensor ? and will it turn on the check engine light after i remove them ? shoot me with something thanks
#2
#4
#5
Any sensor you disconnect will set a code and the Maintenance light. To do any modifications you will need to reprogram the ECM and erase entries for the desired deleted item. All of this is for off road only and shops will have you sign a waiver and not be liable. In turn you will be liable for fines extending from altering a DPF system and driving it on the roadways. That said try H&S or EFI live if you want to delete.
The following users liked this post:
Anh Chà n (07-22-2016)
#7
It's Massachusetts and they don't run emission check on diesel vehicles here I guest (if they do I can't get to pass my old 2dn generation cuz it an 02 ram and they only not require emission check for vehicles with 15 years or older)... intake , exhaust , bully dog , EFILive Autocal and EGR delete package will runs me about 2600 .... so I have to spend a little over my budget to get an AFE lift pump to complete my starter mods .
#9
#10