cel with sims and dpf
#1
cel with sims and dpf
well i put my stage two flo pro in the truck saturday morning along with the sims from rollin smoke. i waited for my juice to clear codes on start up and fired it up. let it run and bout 30 secs later cel comes on i check the codes and it says p200c and p200e wat could be causing this?
#4
#5
Ok so is there anything i can do to get rid of the cel.
---AutoMerged DoublePost---
I JUST READ ON H&S THAT THE SIMS CAUSE A CEL THAT CAN NOT BE CLEARED BY CODE CLEARING DEVICE TILL REMOVED FROM VEIHICLE. CAN I RUN THE TRUCK WITH OUT THE SIMS?
---AutoMerged DoublePost---
I JUST READ ON H&S THAT THE SIMS CAUSE A CEL THAT CAN NOT BE CLEARED BY CODE CLEARING DEVICE TILL REMOVED FROM VEIHICLE. CAN I RUN THE TRUCK WITH OUT THE SIMS?
Last edited by hntruckman; 03-29-2010 at 09:58 AM. Reason: Automerged Doublepost
#8
Thats the strange thing with the Edge and codes. We have had customers using your setup that have had zero codes and others who have them show up. I believe it has something to do with the one zillion flashes they have put on the trucks.
To answer your question, the only way to be code and CEL free would be the H&S or Smarty tuners.
James
RSD
To answer your question, the only way to be code and CEL free would be the H&S or Smarty tuners.
James
RSD