2011 2500 delete help
#1
2011 2500 delete help
Hi new here and looking to do the deletes on my truck. Im not looking to make alot of hp just want to let the motor breath. Want to do full exhaust. What are some good options? I want to delete the throttle control valve also thanks
Last edited by Capt. Tim; 09-15-2014 at 06:41 PM.
#4
Any and all deletes to the emissions... Adding a programmer, which u need to delete the emissions BS!!! I would never done it any other way!!! No regrets throwing my warranty away!
#7
Just from what I've read it seems these blow gaskets easy so you should just do it to be safe but I heard up to 40psi boost should be safe... Mine puts out 36psi boost n didn't get them yet... The only thing I've blew out is my 5th & 6th gears so far... And I run the ***** off mine.... If ur gna run it I suggest getting ur tranny built asap! BC the power difference is incredible! The stock tranny can't handle it.... Good luck!
#8
#9
#10
And the tranny build is necessary BC it can't take the power ur about to put out!... I tore 5th n 6th out after launching n racing it a couple dozen times...n I got everything ur about to do except head studs on my 2010 2500 crew cab 8' bed 4wd... N its insane!... Mini max estimates 1071 ft/lbs torque & 13.2 sec. 1/4 mi...