Need help with my 08 6.7 mega cab
Worked all day Friday truck ran great stopped at my dads for 30 minutes when I left the truck started surging and wouldn't go but 5 mph all the way home,(I live like a quarter mile away)no engine light etc. truck is stock with 120,000 miles . After I shut it off and started it back up it seems fine but has me worried now. Thanks for any help.
---AutoMerged DoublePost---
Drove it today and now light came on put scanner on it has 3 codes
P2262 turbo boost pressure not detected mechanical
P2563 turbo boost control position sensor a circuit range/performance
P0471 exhaust pressure sensor a circuit range/performance
Also turbo has been cleaned recently .
---AutoMerged DoublePost---
Drove it today and now light came on put scanner on it has 3 codes
P2262 turbo boost pressure not detected mechanical
P2563 turbo boost control position sensor a circuit range/performance
P0471 exhaust pressure sensor a circuit range/performance
Also turbo has been cleaned recently .
Last edited by Landshark383; Feb 3, 2014 at 09:42 AM. Reason: Automerged Doublepost
The 5 miles per hour thing sounds like the motor was in a limp mode.
When you said the turbo was cleaned, what do you mean?
It sounds like the turbo is tied in with your running issue.
When you said the turbo was cleaned, what do you mean?

It sounds like the turbo is tied in with your running issue.
Worked all day Friday truck ran great stopped at my dads for 30 minutes when I left the truck started surging and wouldn't go but 5 mph all the way home,(I live like a quarter mile away)no engine light etc. truck is stock with 120,000 miles . After I shut it off and started it back up it seems fine but has me worried now. Thanks for any help.
---AutoMerged DoublePost---
Drove it today and now light came on put scanner on it has 3 codes
P2262 turbo boost pressure not detected mechanical
P2563 turbo boost control position sensor a circuit range/performance
P0471 exhaust pressure sensor a circuit range/performance
Also turbo has been cleaned recently .
---AutoMerged DoublePost---
Drove it today and now light came on put scanner on it has 3 codes
P2262 turbo boost pressure not detected mechanical
P2563 turbo boost control position sensor a circuit range/performance
P0471 exhaust pressure sensor a circuit range/performance
Also turbo has been cleaned recently .

Best bet is to delete that stuff out of the truck and help the engine breath again before you hit catastrophic failure
Chances are the vanes are all clogged up which is a common thing for these trucks with the emissions intact .

Chances are the vanes are all clogged up which is a common thing for these trucks with the emissions intact .
Thread
Thread Starter
Forum
Replies
Last Post
scubasegt
12 Valve 2nd Gen Dodge Cummins 94-98
1
Jun 9, 2015 12:07 PM
torino73
12 Valve 2nd Gen Dodge Cummins 94-98
0
Apr 14, 2015 11:15 PM
Jthompson_32
Diesel Bombers Introduction
1
Oct 5, 2014 09:51 PM





