looking to replace that baby H1c in my truck with a larger charger. Im not too concerned about lack of spoolup because its not driven daily and interested in Sledpulling. i was thinking Hx50 or He351 "CW" or "VE"? only problem is that i cant seem to find specs on either of these anywhere.Any help is much appreciated.TIA

 

Give Nick at low budget diesel a call just talked to him today and he has an HX-50

 

if you have money a 62/71/14 or so s300 would be a good one to get.

 

If you have the fuel go with an S400.

 

well i am purchasing some SDX 6x16 sticks so i want to have the turbo to keep the egts in check.so i was thinking something with a 62 or 64mm inducer and 71ish turbine and maybe 14-16cm exhaust housing? does this sound about right?

 

Bobby has a Silver 62 on his 1st Gen. The new 74mm Wheel on the Silver Series Turbos spool better than the old 71mm wheels on the Super Series.

 

Thankyou exactly the kind of info i needed.well now im kinda set on the silver 62 or 64 basedon what ive been researching and askin some buddies and they all run silver 64's.looks like its time to bust out that piggy bank!

 

Here is Bobbys 89 with the Silver 62 Turbo

 

That 74mm wheel must move some wind.

 

my silver62 is about all I would run as a single. Anything larger is too hard to light with a VE and its limited RPMs. I'm having spooling issues now with mine. Runs great on the top but I'm catching hell getting it lit with the sled behind me.

Also I think a HX50 would be too much Turbo. Gonna be real hard to light and keep on top of.