I love it.

I was lucky enough to be one of the winners in the giveaway and put the pin in over the weekend. First thing I noticed is my truck spools MUCH faster and has better get-up-n-go. Next would be the option of smoking out the lane in every gear, which I need to detune the pump or do the valet switch mod because even with babying the truck through the gears it still hazes out the lane and I want the option of driving without smoke then being able to flip a switch when I want it.

My turbo now has no trouble hitting 15psi and I can peg 20psi with no problem, which is unlike before when 20psi was hard to reach even with my 12cm housing. I haven't noticed too much of a drop in fuel economy... I've driven 270 miles and am just below half a tank, which is all stop and go city driving, whereas with the factory pin I would probably be at or a little above 300 miles.

I only have one pic which is a comparison and I'm sure everyone has seen it before but I will go ahead and throw it up. I have not had time yet to get some smoke pics or videos, or even a ride along video.

 

congrats on winning and sounds like your new dennyt is working good

 

congrats on your winning of your new dennyt and sounds like it is working good for you

 

Congrats! Sounds like you like it!

 

I want to see a ride along video.

 

I'm still trying to figure out how I could place my camera for a ride along video, but here's two I took yesterday. The only thing I have done with the pump besides the DennyT is the starwheel is in a few cranks.

 

I do tripod setups when I film mine now. I have mounted cameras in the cab as well as the rear bed pointing forward. Its the easiest way to get the most stable shots. Its hard filming gauge shots with a standard if your holding the camera.