any 3 gauge pillar pods for my 93 12 valve?
#2
#6
I used a 3 gauge dash mount pod on mine and mounted it over top of the radio location. I'm still working on fastening it down and trimming the edges a bit to make it look more like it belongs, but I love the location, all the gauges are in an easy to read spot without taking your eyes off the road. The best part, the price was about $45 I think. Got it from Pure Diesel Power. Shipped out fast and their ordering department even called me to make sure I knew it was for the wrong year and advised me that it may not fit perfect. But it's working out good for me so far, as long as you don't mind drilling a few holes in the dash. Mine is far from a pretty truck so I didn't mind taking the drill to it. Here is a link to the one I used. I'll try to snap some pics in a day or two.
http://www.puredieselpower.com/catal...02-p-1336.html
http://www.puredieselpower.com/catal...02-p-1336.html
Last edited by 92W250; 10-11-2009 at 09:12 PM.
#8
#9
I took a single, a double and a die grinder and made my own pillar mount. I started with a 3guage on the dash - still have it. If you are careful it will come out good. I run tach, EGT and boost on the dash and coolant, oil psi and trans/diff temp guages on the pillar. The trans/diff temp guage is run through a SPDT switch so I can read whatever temp I want.
Bob
Bob
#10