STOP BOBBY!!!! every time you post this crap up it makes me want to go out and spend more money on my 1st gen......by the time i get it done ill have more in it than my p-pump truck......ball bearing turbo, 4 inch exhaust, dang i dont need to spend any more money :argh:
|
Originally Posted by LOGANSTANFORTH
(Post 308562)
STOP BOBBY!!!! every time you post this crap up it makes me want to go out and spend more money on my 1st gen......by the time i get it done ill have more in it than my p-pump truck......ball bearing turbo, 4 inch exhaust, dang i dont need to spend any more money :argh:
And parts are cheaper. You can get that edge turbo (which comes with a down pipe) and 4" exhaust for under a grand... You cant beat that! |
9 Attachment(s)
Got to work on the truck some more today and I got the Exhaust on and turbo mounted...
Attachment 53482 Had to clearance the fire wall a little with the sledge hammer for the 2nd gen 4" HX40 style down pipe to fit Attachment 53483 The expandit exhaust I got from Diesel Dawgs has a 3-1/2" Down pipe. Since I used the 4" 2nd gen I cut off the adapter as well as a short piece of the down pipe and joined them with a short piece of flex pipe. Attachment 53484 Attachment 53485 Then it was just a matter of putting the pieces together. The kit went together VERY easy. It fits PERFECT!!! Here is the 4" pipe going past the Transfer Case Attachment 53486 I used band clamps (you can see them in the flex pipe pics) instead of the U-Bolt clamps that come with it. this will make it easier to take apart in the future. I used the u-bolt clamps that came with it for the hangers. Attachment 53487 I used the stock hanger for the tail pipe. I just drilled a hole in the pipe and put the bolt through. Attachment 53488 Again... VERY smooth install! I would HIGHLY recommend this system to anyone who wants a better exhaust for there truck! Attachment 53489 Attachment 53490 |
your missin a lug nut:humm:
|
I'm actually missing 6. 2 each on the rear and 1 each on the front... :D
|
:D you guys must have one hell of a tech to pull down there :lol:
|
No I need to find some before the first pull. No one has them... Its an odd size.
|
Looks good Bobby :U:
|
Bobby i got that same wheel chock......but mines missing the pad........
and it makes it alot easier to install exhaust when your bed lifts up and down also....... |
Originally Posted by LOGANSTANFORTH
(Post 309628)
Bobby i got that same wheel chock......but mines missing the pad........
and it makes it alot easier to install exhaust when your bed lifts up and down also....... I did do most of it laid on my back though. Wouldn't be that hard. |
All times are GMT -5. The time now is 09:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands