Removing Edge EZ from a 2006 Cummins?
#1
Removing Edge EZ from a 2006 Cummins?
Truck in my sig is the one in question. Searched their website and didnt see any details on exactly how to return to stock. The reason i want to remove it is my check engine light is on and code reader says "link error". Also when i try to start the truck, everything powers up like normal but does nothing when i turn the key and the gear indicator is completely gone. Truck has 130,000miles. Thanks in advance
Just saw that i shoulda posted this in the Performance section, sorry
Just saw that i shoulda posted this in the Performance section, sorry
Last edited by Mr.CityWide; 05-07-2012 at 09:56 PM. Reason: Wrong section
#3
It should just disconnect at the fuel pressure sensor and MAP sensor. Remove the Edge Y connector, and plug the factory harness back into the sensor.
http://www.edgeproducts.com/product_...manual-157.pdf
Page 10 shows where the connections are. After disconnected, it's just a matter of physically removing the harness and module.
http://www.edgeproducts.com/product_...manual-157.pdf
Page 10 shows where the connections are. After disconnected, it's just a matter of physically removing the harness and module.
#4
So there's nothing else that needs to be done other than physically remove the harness? I just want to make sure before I do it in case there are some other steps that need to be taken. Also from what I've been reading, the problem I'm having with it not starting or cranking is adjusting the cable from underneath the steering column?
Sent from my PC36100 using Tapatalk
Sent from my PC36100 using Tapatalk
#6
#7
EDIT: P0193
So i misread the numbers like a moron. The code p0193 and the truck wont crank. What are some possible causes/solutions? Oh and the tranny leak is a cracked OD housing, thinking about buying a housing and doing it myself, Anyone else done thats done this have any tips/tricks or know where i can get a reasonably priced housing?
Thread
Thread Starter
Forum
Replies
Last Post
Ram700
5.9 Liter CR Dodge Cummins 03-07
2
01-02-2015 08:14 PM
Sbboozer
Dodge Truck and Cummins Turbo Diesel Forum
3
11-16-2014 05:52 PM