5.9L CR Performance Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection Related To Performance And Longevity

no start after airdog install

Thread Tools
 
Search this Thread
 
  #1  
Old 01-18-2011, 09:43 PM
eloydiesel's Avatar
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default no start after airdog install

working on 2005 dodge cummins. had a hard start problem so i installed new injectors and a air dog. now im am not getting any fuel pressrue from injector pump and air dog is giving it 17psi. any ideas
 
  #2  
Old 01-18-2011, 10:18 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

Did you bleed the air out?
 
  #3  
Old 01-19-2011, 11:15 AM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

any codes
 
  #4  
Old 01-19-2011, 11:32 AM
Farmboy 2.0's Avatar
Diesel Bomber
Join Date: Feb 2010
Location: N. Idaho
Posts: 2,386
Received 162 Likes on 143 Posts
Default

Did you fill the filters up? And did you pull the fitting off the cp3 to see if fuel is coming out
 
  #5  
Old 01-20-2011, 06:52 PM
eloydiesel's Avatar
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

yes i have done all of that. i am not getting any fuel from cp3 now
 
  #6  
Old 01-20-2011, 07:11 PM
crzycummins's Avatar
Diesel Bomber
Join Date: Mar 2010
Location: forsyth il
Posts: 1,186
Received 87 Likes on 69 Posts
Default

have you checked to see if you have any bad fuses or relays. maybe a bad connection to the cp3
 
  #7  
Old 01-20-2011, 07:17 PM
Whit's Avatar
Site Mascot
Join Date: Mar 2007
Location: Why-homing
Posts: 16,010
Received 940 Likes on 701 Posts
Default

I had this issue once with a Fass.............same only different

turns out the Fass was vaporlocked, I pulled the discharge off the pump and it took off hell bent for leather
 
  #8  
Old 01-21-2011, 11:24 AM
eloydiesel's Avatar
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

yes i have checked all fuses all connections even changed out cp3 with known good one
 
  #9  
Old 01-21-2011, 01:49 PM
crzycummins's Avatar
Diesel Bomber
Join Date: Mar 2010
Location: forsyth il
Posts: 1,186
Received 87 Likes on 69 Posts
Default

do these have a regulator that might be stuck?
 
  #10  
Old 01-21-2011, 02:04 PM
Farmboy 2.0's Avatar
Diesel Bomber
Join Date: Feb 2010
Location: N. Idaho
Posts: 2,386
Received 162 Likes on 143 Posts
Default

HAve you seen if there is fuel at the filters and if fuel is pumping out? Any pinched lines going to pump?
 


Quick Reply: no start after airdog install



All times are GMT -5. The time now is 08:48 AM.