TST PowermaxCR with R49
#1
TST PowermaxCR with R49
I'm planning on stacking the TST with Smarty, and I think I've decided to buy the TST first since I can use the R49 for gauges. This would avoid spending a few hundred dollars on parts that don't add any functionality to the truck (my method of thinking anyway). Anyone run the TST? I've read lots of good things especially when stacked with the Smarty, but that's a transmission replacement down the road.
#5
#6
#7
The TST and Smarty is an incredible stack....You just have to make sure you run an even number smarty tune with NO TIMING!!!!!! The cool thing about the early CR's is that you can stack three chips. You can have the smarty running your DURATION, an MP8 or EZ running your pressure, and you can have the TST running your timing! Pretty awesome huh?
Just gotta be incredibly careful and you better make sure you have the mods to support it them....
Just gotta be incredibly careful and you better make sure you have the mods to support it them....
#9
Well...It would give u peak power for sure. But you need to do a few things before you go and stack three chips....If you stack two you need at least a lift pump and then your stock CP3 is on limited life unless you get a Arson III kit.... You also need to be running more air as well.
Just make sure that whatever you do you do it right and safely. I would wait for some time before you run three chips but it is possible to do it....
Just make sure that whatever you do you do it right and safely. I would wait for some time before you run three chips but it is possible to do it....
Thread
Thread Starter
Forum
Replies
Last Post