Smarty TNT Revo download...oops
#1
#3
#4
hey this is a little off topic, but you get 700hp on sw9 with your setup? hows the power with sw5 on 75%
I am running similar mods, but twins and lift pump..and my trucks feels slow to me..I have a built race tranny and 90hp injectors, but even running on 9 all the time feels slow....
i don't drive it hard much, but i figure the only down side of running 9 all the time is the poor fuel economy...
I don't have a pressure box though
---AutoMerged DoublePost---
i suppose the dealer can flash me back to stock as well
I am running similar mods, but twins and lift pump..and my trucks feels slow to me..I have a built race tranny and 90hp injectors, but even running on 9 all the time feels slow....
i don't drive it hard much, but i figure the only down side of running 9 all the time is the poor fuel economy...
I don't have a pressure box though
---AutoMerged DoublePost---
i suppose the dealer can flash me back to stock as well
Last edited by megawagon; 01-20-2010 at 09:44 PM. Reason: Automerged Doublepost
#6
I am officially a dummy...So I took the truck to the dealer and they reflashed the ECU. I then attached the smarty back to the truck and tried to then read stock and it said I was on Catcher level 9 (as it was before)...So apparently there was no need to get the ecu reflashed..what do I do now? I looked on the Smarty website but it appears that there is no Tech line in the US
#7
Wagner and Associates
Smartypower.com
(888) 225-7637
(253) 735-6281
bob-wagner@msn.com
He's the only one that can fix it. Good luck!
Smartypower.com
(888) 225-7637
(253) 735-6281
bob-wagner@msn.com
He's the only one that can fix it. Good luck!
#8
#9
#10
BS, you DO NOT need to return to stock. period
---AutoMerged DoublePost---
where did you purchase? Your dealer (if educated) should be able to handle your after purchase sales questions and tech support.
---AutoMerged DoublePost---
I am officially a dummy...So I took the truck to the dealer and they reflashed the ECU. I then attached the smarty back to the truck and tried to then read stock and it said I was on Catcher level 9 (as it was before)...So apparently there was no need to get the ecu reflashed..what do I do now? I looked on the Smarty website but it appears that there is no Tech line in the US
where did you purchase? Your dealer (if educated) should be able to handle your after purchase sales questions and tech support.
Last edited by Bob Wagner; 02-07-2010 at 11:56 PM. Reason: Automerged Doublepost