I just bought my 07 5.9 Cummins and I've already got my smarty ordered but for a little more power down the road, would combining the smarty with an edge juice be a good combination? Is anyone running this setup? Is anyone running a smarty with another chip?

 

ive only heard people use just straight up smarty...

 

not sure about ur 07 but my 03 i can run the edge and smarty on even numbers. the edge advances timing and u shouldnt double add timing hense the even numbers on the smarty

 

Yes you can run that setup a lot of people have done and like it. Like said above run the smarty on even #'s.

 

Another popular stack I've heard of especially with the common rail motors is the Smarty ans TST stack. Most guys I've read about makin 1000+ seemed to have that setup

 

my friend just put a hole in a piston stackin the two

 

tst will not work on a 07 5.9 cummins but the quadzilla adrenaline is good too i hear

 

So What would you suggest if you were going to stack the 2? would you just get rid of the juice and keep the smarty? From what i heard you should run the smarty on a high setting when you are just driving down the road but you can use them for a quick drag...

 

If you're going to run both, you would use the edge for timing and you would keep the smarty on the even # settings. If you use both for timing then your more than likely going to put a whole through a piston... Until I get my CP3 taken care of I won't be able to even try stacking the two but my smarty by itself is purely amazing, I usely run in 3 or 5 (#3=60hp #5=90hp) and my truck gets it, and before my CP3 started dying #9 threw your head in the back of the seat...

 

i got juice and smarty on 08 6.7. i just use edge for gauges.