no spool brake??????
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2008
Posts: 465
Likes: 18
From: schnecksville pa
no spool brake??????
hey i just got an 2004 dodge 3500 4x4 dually with the high output and the auto trans. anyone tell me why when i have my foot on the brake and mash the gas pedal nothin happens no revs nothin i cant spool it or do burnouts 
Bombardier
Joined: Mar 2007
Posts: 9,655
Likes: 607
From: Da' Dirty South
i believe it is the stock torque management in the computer that limits the trucks power unless the truck is rolling etc. it is to save the tranny and other drive line components that the torque of the motor will cause them to fail
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2008
Posts: 465
Likes: 18
From: schnecksville pa
no it aint slippin the motor will not even come off idle let off the brake and mash it and it blows the duals off and rolls the coal and there is no tuner just intake stacks and a full built suncoast trans and converter
---AutoMerged DoublePost---
yha i know bout tq managment but why does my 2007 5.9 2500 bake em when it was bone stock it would spool rev etc not the 04 it just idles
guess i need a PPE hot 2 tuner then those duals well spin 
---AutoMerged DoublePost---
yha i know bout tq managment but why does my 2007 5.9 2500 bake em when it was bone stock it would spool rev etc not the 04 it just idles
guess i need a PPE hot 2 tuner then those duals well spin
Last edited by 07redsled; Jan 14, 2009 at 11:07 PM. Reason: Automerged Doublepost
Thread Starter
|
Diesel Enthusiast
Joined: Nov 2008
Posts: 465
Likes: 18
From: schnecksville pa
sorry 04.5 my bad 600 motor yah its got somethin done to it she puts the speedo way past 120 mph and sooots hard the whole time im on the throttle
Last edited by 07redsled; Jan 14, 2009 at 11:17 PM.
