hey guys i am wanting to rig up a smoke switch on my 1999 dodge 3500 and wanting to know if anyone can explain which wires to splice into and what not. and is there any dangers with the switch. if anyone whos done it throw me some feedback that would be awsome thanks guys.

 

Dont do a smoke switch, bottom line just dont.

 

Ok thanks I'm just curious of the reasons not to I'm saving for edge juice w/ attitude just havin hard time waitin thats all

 

Smoke switch will give you no benefits whatsoever. Smoke means wasted fuel, doesnt always mean power. If your getting that edge hope you have an aftermarket lift pump and if its a manual a mild built trans.

 

You need a programmer to do a smoke switch. Build your truck for power, smoke will follow. Any tips you may hear like unplugging map sensor, etc, are really just bad ideas.

---AutoMerged DoublePost---

And you should do a pusher pump before the juice if you don't have one already. Only thing worse than saving for performance parts is saving for a new vp44

 

Ok well I I understand the fact that smoke switch don't do ****, just was hopin for somethin to get them **** heads with the runner cars to F off. In mean time. I have stock trans n understand she's gunna need build or grenade and u guys know if I'll cause harm if it takes little bit to get an airdog too. I rele wanted edge CTS for gauges and economy with also some extra jam!

 

 

Ok little harsh I get it I dot just want smoke I want more power but power costs money in te world of efi. So instead of being a solid **** stain just give me some poiters if u have any

 

Spend the money. I thought about it to but i would rather spend the money than screw up my truck. Its on youtube if you really must have it

 

If you just want smoke put a lift pump and injectors on it but it wont last long if you don't do what we call supporting mods bud. Like gauges intake trans build

Sent from my dumb phone!