hi i have a 01 6speed it has 3.55 gear i put a s300g on and wondering what injectors to use for towing 10k at most. i have some dap 120hp but think the might run hot what yall think

 

what are the specs of the charger?

 

its a 58/65/14 iam pretty sure

 

if i remember right it is a S357/65/.70T3 gated. we have ran 100hp sticks on stock chargers and 150hp on 62mm chargers. i think you would be fine with the 120hps and the 300g.

it flows 50lb/min and BW rates them for around 400hp which would be just about right with those sticks

 

also i know they sell a 62 mm wheel and housing for the s300g for like 400 dollars so worse case i could just upgrade to the bigger compressor wheell if it ran hot right and do you think i need head studs i have clutch just aint put it in yet

 

head studs are never a bad idea, plenty of guys pop headgaskets with stock chargers