Edge Comp Box
#1
#2
#3
exactly. but reading your sig make sure you remove the superchip off the truck or you will have timing issues... also get a better lift pump than the ddrp or you will be in trouble with your vp
#4
Alright so how would you hook this up without tapping the Ppump. Williams I took the hotrod off and put a regular VP44 on it, and yeah sold the damn superchips flashpaq tuner and picked up the comp box.. Im not looking to hotrod the truck, just the occasional oh its a diesel blow some smoke..(and to have that little gitty up! )
---AutoMerged DoublePost---
Oh and I paid 250 for the comp box...
---AutoMerged DoublePost---
Oh and I paid 250 for the comp box...
Last edited by mcsd913; 03-20-2012 at 02:40 PM. Reason: Automerged Doublepost
#5
That's a decent price for that powerful box.
http://www.edgeproducts.com/product_...manual-210.pdf
Do everything but "Injection Pump Wire Connection"
http://www.edgeproducts.com/product_...manual-210.pdf
Do everything but "Injection Pump Wire Connection"
#6
You just hook the Comp up to your MAP sensor and Data Link. I did this on mine w/stock transmission, stacked with smarty on lvl 2 and my transmission wanted none of it. If you dont try to smoke out every stop sign around, you should be able to keep your tranny together on the lower settings. Do a search on here for Edge Comp Box and you will find a post i believe by: RAWilliams that describes how the power levels and the sub levels work.
P.S. RAW, you are a 24v genius
P.S. RAW, you are a 24v genius
The following users liked this post:
RAW (03-21-2012)
#7
#9