wanna p-pump my 24 valve
#6
I had maybe $1500 when all was said and done when I p-pumped mine. If you are patient and locate all the pieces you, most sourced from any 12v you can save a good bit that way. You can also find used untouched 160hp and 180 for around $600-800, which would be plenty for a street truck once they were modded. The cost is totally up to you and what you want.
#7
I had maybe $1500 when all was said and done when I p-pumped mine. If you are patient and locate all the pieces you, most sourced from any 12v you can save a good bit that way. You can also find used untouched 160hp and 180 for around $600-800, which would be plenty for a street truck once they were modded. The cost is totally up to you and what you want.
#8
you need pump, pump gear, pump bracket, linkage, cam w/ retainer bolt, cam gear, front engine plate and cover, injection lines, injectors reworked, think thats everything. youll have to come up with a way to get oil supply to pump. Id try to get as much as possible from ebay, classifieds or salvage yard, if your lucky youll only have to buy lines and cam new but you can buy all of it new if you got the money
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
btg2820
12 Valve 2nd Gen Dodge Cummins 94-98
1
04-27-2015 12:09 AM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM