Im still using the stock feed line on my AirDog!

I am going to start making AFFORDABLE sump pickups soon though. Will be available in Garage Enterprises section. They will be welded stainless... Goal $ is under 100$!

 

puttin my fass 150 on next week with big fuel lines so it'll save me there. i know i need a bigger turbo cuz i only see 22lbs max. head studes will come soon i know not to romp around on stage 10 too much. just playin it safe till i get more parts

 

You can run stage 10 on 1000 series tune. Your turbo can make WAY more then 22psi. You just have to plug up your waste gate or clamp it down... You have an HX35 with the hose comming off the waste gate?? Mines just plugged with a bolt (prior owner)

 

no hose on it

 

I would ask one of these guys how to turn up your boost then. Just watch fuel pressure... Make sure it stays ABOVE 10psi! Also stay at or below 30 psi of boost!

 

is there a seal or gasket on the manifold part of the turbo? if not a could just undo the wastegate and plug the hole. i was told the hx wont do over 30

 

What do you mean by undo it?

 

the hx will do over 30 pounds but anything much over that it becomes very inefficient.
If your only seeing 22 psi with the tuner on i have a feeling that one of your i/c boots is coming off or is leaking.. and personally i would not plug the waist gate.. boost is just a number and as long as it cleans up the smoke output under fullthrottle you dont need anymore...
Air and fuel go hand in hand with these trucks and its pointless to have way more of one and not the other

 

it smokes pretty good when i get on it. and it doesnt have a hose it