What size leveling kit do i need to level my 2wd 3500 out so it doesnt have such a slope as they come from the factory? What brands would you recommend?

 

I just ordered a dayton 1 1/2" kit for my 98 2wd dually.I will let you know how it turns out after i get and install them.I do know that if you go over 2 " you will need to get shocks but that would be a lift kit.

 

Daystar that is.

 

i did a daystar 2" and i couldnt get the SOB to get in, was a realy pain in the a**. So i just lowered the rear to level it out

 

I finally got the kit and installed them.Took all day because i didnt have some certan wrenches but it wasnt too bad.Made a lot of differance.No slope.

 

Do you have some before and after pics? and the kit you got was the coil spring spacer kind correct?

 

i built my own leveling blocks for my 4x4 when i replaced the axle but if i had to do it again i would get some carrier springs and bilstien shocks thats the best way imo but leveling block work all right mine have lasted but i always over do stuff i bet u could drive a tank on the blocks i built with no prob anyway just my opinion on leveling kits good luck

 

thanks for the input but i got a 2wd so i dont thank i can make my own

 

Bilstien 5100's on these trucks makes a night and day difference!!! I just did a 2" tgc's leveling kit and the bilstiens!! Amazing!!!!!!!!!

 

joe6 is your truck 2wd?