5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

edge jammer injectors? any good?

Old Dec 10, 2010 | 12:16 PM
  #1  
dog's Avatar
dog
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2010
Posts: 132
Likes: 2
From: Milescity,Montana
Question edge jammer injectors? any good?

hey guys I'm looking at a set of stage two edge 75hp jammers has anyone got these and if so are they any good?
 
Reply
Old Dec 10, 2010 | 12:20 PM
  #2  
Farmboy 2.0's Avatar
Diesel Bomber
Joined: Feb 2010
Posts: 2,386
Likes: 162
From: N. Idaho
Default

I had those exact injectors and they were ok, They run hot and dirty but they seemed ok for a cheap set of injectors
 
Reply
Old Dec 10, 2010 | 12:48 PM
  #3  
crzycummins's Avatar
Diesel Bomber
Joined: Mar 2010
Posts: 1,186
Likes: 87
From: forsyth il
Default

i would save a little more and get another brand. just my .02
 
Reply
Old Dec 10, 2010 | 01:07 PM
  #4  
dog's Avatar
dog
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2010
Posts: 132
Likes: 2
From: Milescity,Montana
Default

what brand would be best and what do u mean they run dirty? do you mean they smoke alot?

---AutoMerged DoublePost---

and is it a good move to get injectors before lift pump or the other way around?
 

Last edited by dog; Dec 10, 2010 at 01:07 PM. Reason: Automerged Doublepost
Reply
Old Dec 10, 2010 | 01:07 PM
  #5  
Farmboy 2.0's Avatar
Diesel Bomber
Joined: Feb 2010
Posts: 2,386
Likes: 162
From: N. Idaho
Default

Yes my 75's almost rolled more coal than my 6x18's i have now and they ran just as hot becuase of the crappy 8 hole design and spray pattern. Id save your money and wait for a good set of industrial injections 85's or something along those lines.


GET A GOOD LIFT FIRST! VP's have fuel supply issues even stock.... look into a raptor 150 or a AirDog150 before you do any mods and get a fuel pressure gauge if you dont have one yet
 
Reply
Old Dec 10, 2010 | 01:45 PM
  #6  
dog's Avatar
dog
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2010
Posts: 132
Likes: 2
From: Milescity,Montana
Default

ok thanks a bunch and how hot would they run?
 
Reply
Old Dec 10, 2010 | 01:50 PM
  #7  
Farmboy 2.0's Avatar
Diesel Bomber
Joined: Feb 2010
Posts: 2,386
Likes: 162
From: N. Idaho
Default

I could hit 1350-1400 with my edge juice and a stock turbo and manifold. which is what i hit now with my 6x18's a 62mm turbo and stock manifold
 
Reply
Old Dec 10, 2010 | 01:53 PM
  #8  
dog's Avatar
dog
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2010
Posts: 132
Likes: 2
From: Milescity,Montana
Default

o ok also how do i tell if i have an in tank pump or not im planning on getting the raptor 150 but idk how to tell also should i get a draw straw and the big lines?
 
Reply
Old Dec 10, 2010 | 02:11 PM
  #9  
Farmboy 2.0's Avatar
Diesel Bomber
Joined: Feb 2010
Posts: 2,386
Likes: 162
From: N. Idaho
Default

with the raptor 150 you get big lines and to tell if you have a external lift pump look below and to the right of the fuel filter and if there is a little pump on the side of the block its external if there is nothing it would be a in tank. And you dont have to run a draw straw with the raptor 150 it hooks right to the factory hook up
 
Reply
Old Dec 10, 2010 | 02:15 PM
  #10  
crzycummins's Avatar
Diesel Bomber
Joined: Mar 2010
Posts: 1,186
Likes: 87
From: forsyth il
Default

it will not have an in tank pump unless it has been replaced by a dealer in the past and the did the in tank fix so to speak. and it all depends on what you want out of the truck. if you want big power id go with a draw straw or a sump kit and big lines to feed the max fuel. there are alot of good brands of injectors...industrial injec, sdx, ddp, luke at diesel dogs has big dawg injectors ive heard good things about.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:30 PM.