5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

super b or hx35 +ht60 =twins

Thread Tools
 
Search this Thread
 
  #11  
Old 12-23-2010, 10:09 PM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

Upgrade your lift pump yet?
 
  #12  
Old 12-24-2010, 01:04 AM
kyle davis's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Feb 2009
Location: el dorado ks
Posts: 158
Received 1 Like on 1 Post
Default

yea fuel isnt a problem now.. so as far as i can tell i have all the fuel i can get so to speak from my setup, but is it enough to spool the super b and ht60 twins? ive not been able to find or get a definite anwser.....
 
  #13  
Old 12-24-2010, 09:46 AM
Turbolvr's Avatar
Diesel Enthusiast
Join Date: Oct 2010
Posts: 151
Received 11 Likes on 8 Posts
Default

As someone who has run that set-up, yes, you have just enough fuel and can make 60-65psi. You can also plumb in an external gate for the HT60 and tune the two gates to keep boost/drive low and still flow plenty of air for your needs.
the HX35 is a 56 comp w/12 single gated housing. The superB is a 57 comp w/14 dual gated housing. so the superB can flow a LOT more through its exhaust side which is one of the reasons its a great top turbo for twins.
 
The following users liked this post:
kyle davis (12-24-2010)
  #14  
Old 12-24-2010, 11:26 AM
12vcummins96's Avatar
Administrator

Join Date: Aug 2009
Location: Pearland Tx
Posts: 5,765
Received 340 Likes on 273 Posts
Default

im gonna run a 63/68/.91 divided t4 flange over an ht60 which should make for a great combo also with dual external gates to dial it in
the more exhaust you can put to the secondary the better off you will be so use that super b it should make for a quick spooling set up
a buddy made 600hp with a hx35 over a ht60
good luck
 
  #15  
Old 12-24-2010, 03:12 PM
Turbolvr's Avatar
Diesel Enthusiast
Join Date: Oct 2010
Posts: 151
Received 11 Likes on 8 Posts
Default

Originally Posted by 12vcummins96
im gonna run a 63/68/.91 divided t4 flange over an ht60 which should make for a great combo
You will want to run a spool valve on the rear port of the T4 or you wont start to spool til 2k.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
03-11-2015 04:00 AM



Quick Reply: super b or hx35 +ht60 =twins



All times are GMT -5. The time now is 01:42 PM.