I don't sorry, and I don't have any way to upload any I don't think. Its super easy though the instructions that come with the raptor are great and easy to read

 

right on

 

x2 on the Raptor, install is easy and I run 20 psi at idle and 16-17 at WOT.

Mine is a little noisy but I think it is from modifying the mount. I'll get around to fixing that soon.

 

Also it has lots of pictures so shouldn't be hard, like I said the hardest and most time consuming part for me was trying the get the factory fuel line off the supply on the tank, I had to use angled fisherman pliers to squeeze the clips and ended up tugging and pulled for a while until I finally got it off and smacked my elbow on the bed which felt great haha. Nice thing about doing the raptor since it uses the factory pickup o the tank is that you don't have to take the bed off. If your not too big of a fella you should be able to just sit up inside the space between the frame and outer fender on the box. Atleast I could on my long bed, I'm not sure how people would do it on a short bed. But anyways its a cake install. I was kinda worried going into it being my first time but after I did it I realized how easy it was.

---AutoMerged DoublePost---

Maybe if you pm me your number I could send you pictures of the finished install on my cell if you really want to take a look.

 

for the price difference I say airdog and get the better filtration. but if you can't swing it the raptor is the next best choice.

 

Thanks for the info fellas

Thats ok wyodiesel92.
Thanks,
Matt

 

Can't go wrong with either setup. Just depends on your budget.

 

Thanks Luke,
You will be hearing from me soon!