5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

edge juice

Thread Tools
 
Search this Thread
 
Old Aug 6, 2010 | 02:53 PM
  #1  
jtcummins's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2009
Posts: 16
Likes: 0
Default edge juice

I just got an ejwa. I was wondering how long can i run it before i need to get a fass fuel system or air dog? I was thinking about just getting a ppe i think it is? just till i get the money to get somethin better.
 
Reply
Old Aug 6, 2010 | 03:36 PM
  #2  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

Yikes!!! Running an Juice or any performance mod without an upgraded lift pump is risky! Watch your fuel pressure, don't let it drop under 10PSI with the engine running EVER. Damage to the VP44 will occur. A AirDog Raptor, or FASS DDRP would be a cost efficient way to keep fuel pressure where it needs to be, and doesn't require dropping the tank.
 

Last edited by RAW; Aug 7, 2010 at 08:00 AM.
Reply
Old Aug 6, 2010 | 11:39 PM
  #3  
01quadcab's Avatar
Diesel Bomber
Joined: Jun 2007
Posts: 2,664
Likes: 153
From: Shingletown ca
Default

Originally Posted by jtcummins
I just got an ejwa. I was wondering how long can i run it before i need to get a fass fuel system or air dog? I was thinking about just getting a ppe i think it is? just till i get the money to get somethin better.
whats your fuel pressure at? If you can maintain at least 7psi at wot you will be ok. But in most cases you can't run it over level 1 or 2 without chance of pump failure. Don't waste your money on a ppe. save your cash and get a good system it's worth it especially with the smaller micron filter. I myself like fass but I know a lot of people run airdog too. Lifetime warranty means a lot.
 
Reply
Old Aug 7, 2010 | 07:43 AM
  #4  
jtcummins's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2009
Posts: 16
Likes: 0
Default

well i think im gonna hold off on puting the chip in till i get somethin but thanks for the help
 
Reply
Old Aug 7, 2010 | 04:20 PM
  #5  
01quadcab's Avatar
Diesel Bomber
Joined: Jun 2007
Posts: 2,664
Likes: 153
From: Shingletown ca
Default

you can add the chip but don't tap the pump wire and it should be ok. your better off to have some gauges than nothing at all.
 
Reply
Old Aug 7, 2010 | 04:48 PM
  #6  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

Thanks a very good point! You can have all of the features, but no power gain. Then the temptaion will be removed and possible damage avoided. When you do tap the pump, I strongly suggest a Steakth Plate so no external wires have there insulation punctured.
 
Reply
Old Aug 8, 2010 | 03:59 PM
  #7  
jtcummins's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2009
Posts: 16
Likes: 0
Default

thanks and i got a smokin deal on a FASS ddrp, with some gauges pyro,boost,trany temp, fuel psi
 
Reply
Old Aug 8, 2010 | 05:43 PM
  #8  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

 
Reply
Old Aug 8, 2010 | 07:51 PM
  #9  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

The FASS DDRP is fine for a stock truck or a truck with a small box.
 
Reply
Old Aug 8, 2010 | 11:45 PM
  #10  
24vmatt's Avatar
Diesel Wrench
iTrader: (-1)
Joined: May 2010
Posts: 671
Likes: 44
From: Minnesota
Default

how about the Raptor, or a bd aux lift pump?
 
Reply



All times are GMT -5. The time now is 11:27 PM.