5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

Raptor 95, 100 or 150

Thread Tools
 
Search this Thread
 
  #1  
Old 07-05-2010, 01:38 AM
tburke's Avatar
Diesel Fan
Thread Starter
Join Date: Oct 2008
Posts: 84
Received 1 Like on 1 Post
Default Raptor 95, 100 or 150

Thinking about getting a raptor. The only mod I have is the edge juice with attitude. I'm thinking I should get the raptor 100 but if I get the 150 would that be to much pump?
 
  #2  
Old 07-05-2010, 07:28 AM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

As these units have a built in regulator, there really isn't "too much pump". If you go larger now, there is room for more modifications without having to change your lift pump again.
 
  #3  
Old 07-05-2010, 01:55 PM
tburke's Avatar
Diesel Fan
Thread Starter
Join Date: Oct 2008
Posts: 84
Received 1 Like on 1 Post
Default

Oh good, then best to go with the 150...Thanks
 
  #4  
Old 07-05-2010, 02:13 PM
Billy D's Avatar
Diesel Bomber
Join Date: Nov 2009
Location: Ohio
Posts: 1,026
Received 45 Likes on 40 Posts
Default

Raptors rock
 
  #5  
Old 07-05-2010, 02:59 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

I would do the 150 and replace your draw tube.
 
  #6  
Old 07-05-2010, 09:10 PM
tburke's Avatar
Diesel Fan
Thread Starter
Join Date: Oct 2008
Posts: 84
Received 1 Like on 1 Post
Default

Would I need to remove the tank or bed to install the draw tube?
 
  #7  
Old 07-05-2010, 11:17 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

Ya thats the hardest part of the install.
 
  #8  
Old 07-05-2010, 11:40 PM
tburke's Avatar
Diesel Fan
Thread Starter
Join Date: Oct 2008
Posts: 84
Received 1 Like on 1 Post
Default

Ok, thanks for your help.
 
  #9  
Old 07-06-2010, 08:01 AM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

I didn't find it too bad when I put my FASS and Draw Straw in. I had the tank very, very low on fuel which helped a lot. A couple 4x4's and a floor jack is all I used to raise and lower the tank. There is a frame cross member that needs to be unbolted and swung out of the way, and then it's free to come down. If my memory is correct.
Good luck!
 
  #10  
Old 07-06-2010, 08:38 AM
rngperf's Avatar
FormerVendor
Join Date: Jan 2009
Location: Monroeville, IN.
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default

Ditto on the other posts. You wont go wrong with going big now, who knows what you might add later? You never know what you might win on one of the give-a-ways. Too much pump is like building too big of a shop, No such thing.
 


Quick Reply: Raptor 95, 100 or 150



All times are GMT -5. The time now is 04:37 PM.