Mighty Diesel's Houdini Head Bolts Install Images
#31
I'll admit to being the guy, I ran up to 75PSI on these headbolts with the stock headgasket. I have ran 50-60 PSI for over a year with the singles I have ran. Great product for the price.
The following users liked this post:
Dr. Evil (06-17-2010)
#32
#34
#36
its the Original stock head gasket you dont seperate the head you just change the bolts 1 by 1 ,
changing them 1 by 1 also allows you to do them in any order you want because they are stock torque specs, if you removed them all at once then yes you would jump around.
and as for the valve lash , the adjustment nut for the valves is not moved as the entire rocker is taken off , nothing changes your just putting in stronger bolts that will keep your head gasket from blowing with high boost pressure
changing them 1 by 1 also allows you to do them in any order you want because they are stock torque specs, if you removed them all at once then yes you would jump around.
and as for the valve lash , the adjustment nut for the valves is not moved as the entire rocker is taken off , nothing changes your just putting in stronger bolts that will keep your head gasket from blowing with high boost pressure
#37
#38
#39
#40
you can change one at a time if you are sure your gasket is not leaking. thats the way my truck was done several years ago by the other owner. its a chance but guys do it all the time.
---AutoMerged DoublePost---
you dont re tq these bolts
---AutoMerged DoublePost---
you dont re tq these bolts
Last edited by diesel pap; 06-19-2010 at 06:47 AM. Reason: Automerged Doublepost