i just got a fuel pressuer gauge for my truck its a danin electrical. i have a raptor 150 lift pump on my truck. ok i was looking to hook it up and the port i need to use i replaced witht he 1/2 in fuel line that came with the lift pupm. so i was wondering is there ne place else to hook it up

 

I just split the fuel line before the injection pump, put a brass tee with barbed fittings on the hose side and put your pressure sending unit in the top...Mine works great

 

do u know wht size i will neede of the top your heat so i can go to the hardwaer in the AM and get it

 

Well whatever size your fuel line is get a brass "t" that size with two barbed fittings. you can get hex bushings to whatever size your sending unit is for the top. Thread it in and clamp your barbed ends with those hoses tight so you don't have leaks and your good to go.

 

You could also get a different Banjo fitting for your VP, and install the gauge right there. If you have the tools, you could drill and tap it yourself. Every splice in a hose is one more possibility for a leak down the road.