40/3B high EGTs
Thread Starter
|
Newbie
Joined: May 2007
Posts: 8
Likes: 1
40/3B high EGTs
Just put together an HX40/HT3b set and fire rings.
I put the wastegate at about 35psi and when it opens the trucks starts running rough and gets hot 1250*+. I then adjusted the boost elbow a little and the wastegate wouldnt open at all and 1600*+. Any ideas? I am worried about the shutter it does with the wastegate open on the HX40
I put the wastegate at about 35psi and when it opens the trucks starts running rough and gets hot 1250*+. I then adjusted the boost elbow a little and the wastegate wouldnt open at all and 1600*+. Any ideas? I am worried about the shutter it does with the wastegate open on the HX40
Thread
Thread Starter
Forum
Replies
Last Post
