Side Exhaust
#21
https://www.dieselbombers.com/member...-truck-002.jpgCummins Smoker...you see my pic in my photo album??? you might like it. 5" Stainless down pipe
Last edited by DanLowe; 02-02-2010 at 08:51 PM. Reason: Add URL
#23
#26
Mine was Custom the way i ran it was where your exhaust goes down the frame cut it before the back wheel and do like 45* angle or you can just get a 90* elbow like for a stack that goes up though the bed But IMO i think 45* angle is better more flow=more HP and lower EGT's hope this helps man. Plus Its way louder than before!!!
#27
My buddy used an 6 inch stack to do his on his 1st gen with pump turned all the way up with govenor spring and fuel pin and it constantly rubbed on the body and frame so we had to weld a bead inbetween the exhaust and the frame to solve that. He loves it sometimes but he constantly complains about all the soot on his rim and on the side of his pickup, he finally painted the truck mostly flat black and it helped some but since the lower panel was still white it still covered it in soot. At like I said before his nice chrome rims on his truck, the back one after the exhaust was always black, even after he spent an hour washing it the rim was still darker than the rest and on the way back from the car wash it just got dirty again. Something to think about if you want to do this to other users. Sorry kinda rambled haha
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM
Jake12valve
Diesel In Distress - Support Ticket
5
05-10-2015 11:57 PM
carid
Diesel Bombers Sponsors
0
12-12-2014 02:26 AM