Ive got a set of Industrial Injection 150's right now and am thinkin about some Machs or maybe even something different ...any ideas ?? I'm lookin for 200 horse ones or even 250's. Thanks Guys.

 

I have a buddy running some mach 6's and a 64 it's plenty of fuel and makes some high egt's at times. I would say yeah go with some mach's as the seem to be one of the best for the 24v vp trucks.

 

Ive got some 250hp injectors that have been extrude honed 30% out.

 

30% is 250hp? Good luck with that.

 

i believe what he means is that the 250hp sticks have been increased by 30% more than what they were

 

Ya 30% would be more like 50hp. But what I think he is saying is that he has taken a set of 250hp nozzles and had them honed 30% more. Im just guessing.

 

Percentage and hp increase are completely dependent on the nozzle that is used as a base, 30% on a stock nozzle is more than 50hp, but nowhere close to 250hp. I would be curious to hear the hone size and hole count on the "claimed" 250hp nozzle.

 

Per Jeff @ Extrude Hone a stock VP44 injector Honed 30% will be close to a 50hp increase. I'm not arguing with ya Weston cause im not an injector man. Just stating what Jeff has told me.

 

I said that I have some 250hp that have been extrude honed 30% out. Really there 190hp edm injectors that then are extrude honed 30% which then makes them about 250hp injectors.