Future turbo
#1
Future turbo
Ok iv got all my mods lined out except what turbo im gonna run. What im gonna do is run the chip i have, an airdog or mitusa lp, gauges, and SDX 125 hp injectors... now question is for a daily driver and occasional trip to the track and not pulling anything bigger than a 2000 pound water trailer should I run a HX35/40 hybrid with 60 mm compresor and 14cm2 exahust houseing ( about $750) or HTTs HTB2 with 13cm2 SS exahust houseing (about $2000)? I would like to keep my spool up where it is (if possible) and have a peak psi at about 42 any opinons?
#4
#6
#8
I would go with a s300 based turbo like a 62 then you can use that as a top turbo for compounds. They hybrid does not hold up as well to abuse. I am making 603 with a s300 62/71/14 over a s475 and 250hp injectors. The 62 will spool well with the 125's and I would get the 13 for the exhaust housing especially for a single.
#9
I would go with a s300 based turbo like a 62 then you can use that as a top turbo for compounds. They hybrid does not hold up as well to abuse. I am making 603 with a s300 62/71/14 over a s475 and 250hp injectors. The 62 will spool well with the 125's and I would get the 13 for the exhaust housing especially for a single.