so i should be recieving my quad adr w/pulse tomorrow. and i was looking over the directions online and i already have fuel pressure boost and pyro gauges in my truck. so what should i do with the hook ups for that stuff for the pulse? also does anybody have any good ideas of where to mount the pulse seeing my A-pilar is already taken up. thanks guys

 

See if you can mount the pulse on top of the steering column. I have the Adrenaline but I didn't get the pulse and I like it because the pyro and boost are already on it. As far as your deal is I would maybe mount the pyro pre or post turbo depending on how you have it now. The fuel press. I would go electronic on it. But whatever you decide your going to love the Adrenaline. I love mine!! Especially in PL10. That's a fun one. Hope you enjoy!

 

when i had mine i just used the double sided tape and stuck it right on the dash close to the a-pillar
I would hook everything up that works on the pulse that way you will have double readings and the pulse will be getting its own readings for the best performance you can get from it