Opinions on injector brands and sizes?
#1
Opinions on injector brands and sizes?
Like most,I don't have the funds to test and try different brands of injectors but am wondering if anyone has had the chance to compare injectors firsthand and am wondering what impressions were.I have heard Jammers are smoky and I know about nozzles and matching and pop testing.Dynomite have name recognition for me but I know there are other brands.I am thinking about 150 hp tops for now.any feedback will be appreciated.
#2
There are very few companys out there that cut there own injectors. Most have them cut the injectors to there specs. I have ran Jammers and some HP nozzles. Both are smokey and can get hot pretty fast. I have had good luck with our Fireball Pro line. For the price its really hard to beat Fireballs and New Era. If I can help with your purchase or decision please let me know.
Luke
Luke
The following users liked this post:
Shecom3 (03-11-2009)
#3
#4
#5
I am running some of our big FireBallPros right now. But it was a great driver all the way down to 100Hp and spooled the twins just fine.
Of course, the bigger sticks do it better. On the '99 we are running the FireBallPro 150's with a HTT64-71-13 over a K31. Spools lightning fast and smoke levels are very low.
Dave
Of course, the bigger sticks do it better. On the '99 we are running the FireBallPro 150's with a HTT64-71-13 over a K31. Spools lightning fast and smoke levels are very low.
Dave
The following users liked this post:
Shecom3 (03-11-2009)
#8
#9
#10
I'm running mach 2.5's in one truck and edge stage 4's in the other. One is 115 and the other 125. I don't see much difference in them. I just put a set of 200 horse tips in a set of bodies to replace the 125's. I'm going to run it with the adrenaline off and switch to see how much boost I gain and speed on a measured distance.