Alright, just took off my old nitrous kit and installed a new one from ZEX. In this kit, i have to tap into my tps wire that will read when im at full throttle. the selenoid should activate (pop) until im at full throttle. well as soon as i flip the switch, the selenoid turns on. im lost at this point. i checked the realy and wires and all seem good. the only thing im thinking is i tapped into the wrong wire on my tps. anyone know which wire i should tap into for a 2002 cummins?

 

 

What if you ran it off a boost switch? You might not want to but thats how i did mine. hmmm. No one else????????

 

you could stick a button under the accelerator

 

thats funny. well i have a boost switch with the kit. when it reads im at 30 psi, it activates the tps and also reads that im at full throttle. im about to bypass the tps and make a switch