So today my ADR desides to go hay wire and read 55psi of boost 120deg on oil temp and now what to come out of the warm up mode. Can someone help me out here. QUAD ARE YOU OUT THERE?

 

Re-Install your Tune.

 

here is what all i have done. reinstalled different tunes about 6 times, checked all plugs and cleaned and reinstalled. took off the map plug with the adr hooked up it reads 17psi then take the pig tail off the harness it reads 3psi. and took the batt off for 30min to see if that would help. Its not even a year old.

 

what tune ya running? old one or new one?
my adr the highest it ever got was about 30 psi for boost
hmm what do you have warm up mode set too?
gotta be something simple

 

and it locked itself in warm up mode at 140deg when it was at 190deg, now i have it set at adr1000f with no warm up mode and it on with the key off it reads 55psi boost and the engine is not running. This thing is giving me a head ake i thing the processer is going out on it. Hell it could be something else but you never know what it is unless you have the right micro swich tools to play with it. This is like the third different problem i have had with it and i dont know what else to trouble shoot. Or how else to trouble shoot either. I just would like the dang thing to work i am getting out of the navy in less then 10 day and having to move to Wy To have a job and i have to be out of my house by the 30th wooo happy birthday to me.

 

hate to say it but if its not an adjustment ya are probably gonna have to send it back in for a firmware upgrade

 

cus cus cus cus cus cussin MF CS POS!

 

Call Quad and get an RMA# and get it fixed. Quad will take care of it.

 

I hope so. They are saying it is no longer under warrenty

 

Shouldn't be cause they didn't start shipping until Feb of last yr.